Group: DynoMotion	Message: 7990	From: Jing Zhang	Date: 7/24/2013
Subject: Max current in analog output in KStep

Hi, Tom,

I would like to use the analog output pin in kstep JP33, Pin 6 to drive a transistor.

What is the maximum current flow for this analog output pin?

My need is about 50 mA.

Best

Jing

Group: DynoMotion	Message: 7991	From: Tom Kerekes	Date: 7/24/2013
Subject: Re: Max current in analog output in KStep

Hi Jing,

The output impedance is about 1K Ohms. It will not drive 50ma.

Here is the circuit:

http://dynomotion.com/Help/SchematicsKStep/IsolatedPWMtoAnalog.png

Regards

Group: DynoMotion	Message: 7992	From: Jing Zhang	Date: 7/24/2013
Subject: Re: Max current in analog output in KStep

Hi, Tom,

Thanks for this information.

I will use two level amplifications for it.

Best

Jing